Imec's industrial-level silicon solar cells exceed 20% efficiency
At this week鈥檚 Intersolar Show in San Francisco (July 9-12, 2012), imec presents a 20.04% large-area industrial-level silicon solar cell (certification results from Fraunhofer ISE-Callab). The cell combines a high efficiency with a low-cost industrial process.
Imec鈥檚 proprietary PERC process maximizes the conversion efficiency of the cell through structure and material optimizations while maintaining cost effective device concepts and processing. Imec鈥檚 PERC-cell is compatible with the requirements of industrial photovoltaic production. It is a large-area (125x125mm虏) Cz p-type silicon cell with a simple homogeneous emitter and Ag-single screen-printed front side contacts (65碌m finger width), two busbars and an adapted Al back-side metallization. This processing simplicity holds the potential for cost reduction and efficiency increase in an industrial production environment. At the moment the transfer of this process to 156x156 mm虏 wafers is ongoing.
The cells were processed at imec鈥檚 newly completed solar cell pre-pilot line. This pre-pilot line is equipped with state-of-the-art industrial equipment for a total value of 10 million euro and is fully capable of processing 156x156mm虏 size solar cell wafers. The line is operated in a flexible way with the capacity to process up to several 1,000 wafers per week.
鈥淎 simple and cost effective PERC cell is imec鈥檚 answer to short term aspiration of the photovoltaic industry to reduce the cost per Watt peak of silicon solar cells. Our PERC process combines a simple device structure with optimized processing to increase the efficiency,鈥� says Dr. Jef Poortmans, director Photovoltaics research at imec, 鈥淲e are delighted to have achieved an efficiency of more than 20% for a standard PERC cell, featuring a large-area, only a homogeneous emitter and Ag-screenprinted contacts. This shows our capability of marrying high performance to simplified processes for crystalline Si solar cells.鈥�
Provided by IMEC
